Advanced users • Re: Still use an SD alongside an SSD on Pi5?
A lot depends on what the OS you have installed on the 3B is.If it's RPiOS Bookworm transferring it is likely to just work though if it's 32bit you'll end up running with a 64bit kernel and 32bit...
View ArticlePython • Re: gpio library for new projects? is pigpio still the best answer?
For python have a look at gpiozero (“ which is installed by default in Raspberry Pi OS.”)Also rpi-lgpio (and gpiod)Due to Pi5 having the new I/O chipStatistics: Posted by neilgl — Sat Jul 20, 2024...
View ArticleTroubleshooting • Re: how to stop listing at boot
Conversely, I always use raspi-config System Options, Splash Screen, Would you like to show the splash screen at boot? NoMaybe try it as YesStatistics: Posted by neilgl — Sat Jul 20, 2024 1:35 pm
View ArticleGeneral • Re: Need advice on sending image data from a Pi5 to several Picos
datagrams are limited to single packets (around 1500 byte).UDP messages are limited to 65.507 bytes.Advantage is that message handling is easy.a protocol that can queue (and re-assemble) larger data...
View ArticleClik here to view.
Troubleshooting • Re: RasberryPI Zero 2W: Unable to connect to home WiFi.
It seems not...Now there is... https://github.com/raspberrypi/bookworm ... issues/279Statistics: Posted by lianergoist — Sat Jul 20, 2024 1:59 pm
View ArticleAndroid • KonstaKANG (lineage-21.0-20240216) on RASPI 4: Geoblocking
I tried KonstaKANG installation on my Raspberry Pi 4. Everything was working fine. I installed PlayStore and some Mediathek-Apps. I am in Germany and tried ARD-Mediathek and ZDF-Mediathek. After some...
View ArticleBeginners • Re: Turning it on
Not sure what your problem is. The 30 seconds could be the RPI boot time.Statistics: Posted by DS256 — Sun Jul 21, 2024 1:12 pm
View ArticleTroubleshooting • Re: Raspberry Pi 5 stuck on red light when power comes back...
Hi, i noticed that my Raspberry Pi 5 gets stuck on a red light when the power goes out and then flickers and comes back for a short amount of time (less than 1 second), then when the power fully comes...
View ArticleClik here to view.
Raspberry Pi Connect • Multi-column device list?
I see a lot of empty space on the device list (see screenshot).Would it be possible to use 2 or more columns with devices. Would give me a better overview (and save a lot of scrolling).Statistics:...
View ArticleNetworking and servers • Re: Using a Pi as a "router"
Forgot to mention a few more things, I already have a VPN setup on my home network (wireguard portforwarded and setup) and it has been working fine for a couple of years.The main point of the pi in my...
View ArticleGeneral discussion • Re: How to Set Up a Raspberry Pi as a Network Attached...
Hello Raspberry Pi Community,I’m interested in turning my Raspberry Pi into a Network Attached Storage (NAS) device and would appreciate some guidance on the best way to achieve this.Previous very...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: SPI display for RPI5 with dtoverlay?
Almost all generic applications will expect input events to come in via the input subsystem in the kernel, not via a Python library.https://github.com/torvalds/linux/blob/ ... n_cstxxx.c claims to be...
View ArticleTroubleshooting • Communication between RPI and pico stops.
HI, I've built a board based on the RP2040. My client connects these to a raspberry pi 4 and then controls stuff through sending USB commands (the USB-stdio stuff). He complains that sometimes this...
View ArticleRaspberry Pi OS • Re: how to stop listing at boot
This is all quite normal.Is there a perception of a problem here?No, but now you ask.., there is a different understanding what to show at boot. If the splash screen is on, what is the purpose of...
View ArticleClik here to view.
General discussion • Using P-Channel Mosfet with RPI Pico W
Hi there I got quite a project on my end I am using a mosfet specifically IRF4905 now the I want to turn on a 12 volts LED using this I have the following materials12v power supplypi pico w12v...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Are the two serial I/O pins 5v tolerant?
Hello!I have a project taking shape where a Raspberry Pi device is going to be accepting a stream of data flowing into it via its serial port on top. Now I know from previous discussions that the...
View ArticleGeneral • Re: Battery powered pico not working
I created a project https://github.com/CrabbyPete/watchible that uses a battery to power a Pico. You need to put it sleep or it will drain the battery quickly. I can run it using this...
View ArticleClik here to view.
Interfacing (DSI, CSI, I2C, etc.) • Re: MIPI DSI DLC0350
Thank you for your reply!!!The backlight is almost always powered external, not by the display controller. Generally the connections are "anode" and "cathode", ie directly on to the LED chains.Yes I...
View ArticleTroubleshooting • Re: Bios does not recognize raspberry Pi in g_multi mode
Only A, A+, and 3A+ can do USB device mode on their USB A ports.For completeness, also the Zero models.Nope. They don't have USB A ports.Here's the complete list of device mode capable Pi as I...
View ArticleMedia centres • Re: Peppy player
The player starts playing a file from a NAS and after some time stops working. What is that time? Does it happen every time? Does the player react to any commands when it stops playing? When it stops...
View Article