WARNING!!! THIS CAN BREAK THINGS SO BE SURE YOU ARE AWARE OF THE CONSEQUENCES OF WHAT YOUR DOING!
run this commandchange to'PSU_MAX_CURRENT=5000' will tell the Pi that your PSU has 5A current capability REGARLESS if that's the case or not. As it will skip USB-C PD it is the sledgehammer solution your using your Pi with a un-official PSU of whatever current rating.
HENCE: don't use that unless you know the risk!
Reboot and report back. If your drive still doesn't work it's your PSU causing this!
Don't moan when 'funny things' were going to happen or you're breaking your equipment!
run this command
Code:
sudo -E rpi-eeprom-config --editCode:
[all]BOOT_UART=1POWER_OFF_ON_HALT=1PSU_MAX_CURRENT=5000BOOT_ORDER=0xf461HENCE: don't use that unless you know the risk!
Reboot and report back. If your drive still doesn't work it's your PSU causing this!
Don't moan when 'funny things' were going to happen or you're breaking your equipment!
Statistics: Posted by aBUGSworstnightmare — Thu Jul 11, 2024 12:30 pm