Troubleshooting • RPi 5 disconnects from Wi-Fi
Hi, I have RPi 5 with RPi OS. It usually works fine, but sometimes the Wi-Fi connection crashes. I have not found a reason for that, everything seems quite normal. The crashes occure when I use Wi-Fi...
View ArticleTroubleshooting • Re: Raspberry Pi 5 screen output problem
you can set the resolution manually: in /boot/cmdline.txt (add to the front/end of the line, NOT a new line)-- IMPORTANT NOTE: for Bookworm, the file is at /boot/firmware/cmdline.txt...
View ArticleCamera board • Re: pibooth install error, "externally- managed-environment
neilgl, I switched to the venv and ran "pip install pibooth", that worked, pibooth was installed. I then entered "pibooth' to launch it. It started to but I , the LED's are on GPIO and 22. They also...
View ArticleGraphics, sound and multimedia • Zero2 analog synth demo
I put a demo video together introducing the Zoxnoxious analog synthesizer and showing how the software frontend, VCV Rack, interfaces to the headless Zero2 that runs the synthesizer. The synth is...
View ArticleBeginners • Re: Raspberry pi 5 many issues
Some Logitech kit needed its own software on the machine before it will work - does Logitech provide anything for the set you have? You may need to pair the dongle with the mouse / keyboard using a...
View ArticleAutomation, sensing and robotics • Re: [Show and tell] Stepper Motor Python...
1st stable release published : https://github.com/juanmf/StepperMotors ... g/v.0.0.20# Packagehttps://pypi.org/project/stepper-motors-juanmf1/# Installpip install --upgrade -i...
View ArticleHATs and other add-ons • Re: NVMe x4 and x1 compatibility?
It is a simple way to shield the cable, not only is it enough to shield it, you have to connect to GND. My pcie errors have disappeared a week ago. greetingsStatistics: Posted by kitopopo — Sun Mar...
View ArticleBeginners • Re: suitable power adapter for raspberry pi 5
5 V 3A is no good to Raspberry Pi 4B; it needs 5.1V, the 0.1 volt addition is critical for Raspberry Pi to work properly.Ignore that poster. 5 Volt 3 Amp is good enough for a 4B. The 0.1 Volt addition...
View ArticleTroubleshooting • Re: SSH and Cannot display desktop
Good idea, don't need the desktop...didn't even think of that. I did that but VNC still shows cannot show desktop, is that correct since boot to command was selected?Statistics: Posted by TBL194 — Sun...
View ArticleWanted • Re: Looking fpr a particular heat sink
Search for copper pin heatsink, loads on Alibaba etc.Statistics: Posted by pidd — Sun Mar 10, 2024 4:17 pm
View ArticleNetworking and servers • Re: Pi3 Bookworm WiFi does not work if router uses...
I think I'm experimenting the same, reported here: viewtopic.php?p=2163188Statistics: Posted by mina — Sun Mar 10, 2024 4:22 pm
View ArticleNetworking and servers • Rpi4 with Samba - Shutting down HDDs that are not...
Hello everyone,I have no idea where to start and that's why I'm here asking for support. I searched on internet and understood that there should be hdparm or udiskctl tools to be able to turn off...
View ArticleTroubleshooting • Re: bullseye64: red screen on SECOND boot
Good one.Statistics: Posted by neilgl — Sun Mar 10, 2024 4:40 pm
View ArticleNetworking and servers • Re: Rpi4 with Samba - Shutting down HDDs that are...
IIRC systemd can do this for you but probably only if you are mounting the drives from /etc/fstab. If you're using the desktop's automounter, A. you should really switch to using /etc/fstab (Samba...
View ArticleTroubleshooting • Re: Raspberry PI 3B WiFi not working!
I just bought a WiFi dongle so I don’t need any helpUsing a USB dongle does get wlanX working, but mine normally runs on batteries, which will have to be more powerful also powering the USB dongle.I...
View ArticleAdvanced users • Re: Moving Linux Kernel to 6.6
Kernel 6.8 was officially released yesterday! Faster networking and better Raspberry Pi 5 support are noteworthy new features. Is there any way to test this new kernel?That query is unrelated to this...
View ArticleTroubleshooting • Re: Mounting Synology Shared Folder
I changed the FSTAB file to the followingCode: mount //192.168.1.179/volume1/homes/ /mnt/SynPi/homes cifs...
View ArticleTroubleshooting • Re: Sat on login screen - Why?
Have you got the screensaver enabled?Statistics: Posted by neilgl — Mon Mar 11, 2024 4:52 pm
View ArticleTroubleshooting • Re: Raspberry Pi 5 screen output problem
Hi, it works now, here is the urlhttps://paste.debian.net/hidden/2af0e9c7/Statistics: Posted by HappyRpi5Owner — Mon Mar 11, 2024 4:53 pm
View ArticleRaspberry Pi OS • Re: dhcpcd.conf don't have
start missing the good old timethe address need a /24 to define the subnet?Statistics: Posted by vikozo — Mon Mar 11, 2024 4:58 pm
View Article