Hi, thanks for the reply, I am using a pi 0 w, I soldered the gpio header myself, and have already checked that each pin works. I will try the testing with a multimeter when I can get my hands on one.Assuming the anemometer is the reed switch and magnet combination, as in the referenced BYO weather station https://projects.raspberrypi.org/en/pro ... -station/5, we should be able to rotate the cups by hand and see using a multimeter if the reed switch opens/closes. That tells us if it is a hardware fault or not.
Are you attaching the hat to a Pi4 or Pi5 or other?
(The rain gauge is similar)
Statistics: Posted by BeeDonk — Fri May 10, 2024 8:02 am